/ Product / Oscilloscope / FNIRSI® 2C53P 3-IN-1 50MHz 250MS/s Dual Channel Tablet Touchable Oscilloscope Multimeter DDS Generator
FNIRSI® 2C53P 3-IN-1 50MHz 250MS/s Dual Channel Tablet Touchable Oscilloscope Multimeter DDS Generator

FNIRSI® 2C53P 3-IN-1 50MHz 250MS/s Dual Channel Tablet Touchable Oscilloscope Multimeter DDS Generator

Fnirsi , Oscilloscope

? 2-Channel Oscilloscope Multimeter: Upgraded from 2C23T. The 2C53P oscilloscope has 250 MS/s sampling rate, 50 MHz bandwidth. Multimeter 19999 counts, 5 measuring values, max and min display. 4.3-inch IPS touch screen, 480*272 high resolution.

? DDS Signal Generator: Outputs 12 waveforms with a maximum frequency of 10 MHz. The FPGA+MCU+ADC architecture ensures strong waveform capture and supports waveform saving, viewing, and export for analysis.

? Efficiency Improvement: Features one-key AUTO for quick measurements and simplified operations, with automatic/normal/single trigger modes. Suitable for both periodic analog and non-periodic digital signals.

? Comprehensive Analysis: X-Y mode compares phase, amplitude, and frequency of two signals, while FFT spectrum analysis estimates harmonic content and manages complex signals.

? Long Battery Life: Built-in 4000mAh battery provides up to 4 hours of use, with Type-C charging for uninterrupted work.

FNIRSI 2C53P is a dual-channel digital oscilloscope with comprehensive functions and high practicality. This device has 3 major functions:

1. The oscilloscope adopts FPGA+MCU+ADC hardware architecture, has a sampling rate of 250MS/s, an analog bandwidth of 50MHz, and supports a peak voltage measurement of ±400V; It supports waveform screenshots, saving, and viewing;

2. Built-in 4.5-digit 19999-point true RMS multimeter, supports AC and DC voltage and current measurements;

3. The built-in function signal generator can output 12 kinds of function signals, with a maximum output frequency of 10MHz, and the output frequency, amplitude, and duty cycle are adjustable.

It uses a 4.3-inch 480*272 resolution touch display and a built-in 4000mAh rechargeable lithium battery which makes standby time up to 4 hours.

It is an ideal multifunctional instrument for electronic maintenance personnel and electronic major students.

Specifications

Brand FNIRSI Model 2C53P

Screen Size & Resolution

4.3 Inch (480*272 pixels)

Screen Material Surface tempered glass + touch screen made of glass + IPS color screen
Backlight

Backlight brightness can be set

Power Supply

TYPE-C (5V/2A)

Battery

4000mAh lithium battery

Language Chinese, English, Pycc???, ????, español, Português, Deutsch, ???
Product Size ≈145x98x35mm Product Weight ≈360g
RELATED PRODUCTS